This product allows you to control different directions by mounting 2 security cameras in the same spot.
Mounting on poles
You can also easily mount the AlteBox T-Mount bracket on poles. Simply use the AB-7009 Bracket and attach it to the pole with a clamp.
Round (Gland) and Angular (Duct) Cable Entry
The AlteBox camera extension bracket is suitable for both gland and conduit cable entry. The round gland entry on one side of the product supports 20mm diameter gland or spiral pipe entry. The conduit entry on the other side is suitable for 6x16mm and 25x16mm conduits.
Suitable for both bullet, turret and dome cameras
You can use the camera extension legs you will make with the AB-7007-8 Extension apparatus for both bullet and dome (turret) cameras.
Very Strong and Robust
Its special 50mm diameter pipe has a minimum wall thickness of 2.5 mm. With this privilege, it is much stronger than all similar products. The security cameras mounted on it do not shake in the wind and there is no shaking in the image.
Riveted Connection Points
Pipe-apparatus joints joined with rivets provide excellent stability in all conditions, even under very heavy loads. They do not rust and can be used safely for years.
Large Mounting Surface
The large 108 mm camera mounting surface is sufficient for most dome, bullet and turret cameras.
Fully Compatible with AB-7006 Clik
AlteBox Aktobat Camera extension foot is fully compatible with AB-7006 model camera junction box. It fits 100% on it, is fixed with screws from the inside and does not leak water.
Fully Compatible with AB-7010 Mega Model
AlteBox Aktobat Camera extension foot is fully compatible with the AB-7010 Mega model camera junction box, which is developed for large diameter cameras up to 100 mm. It is fixed with screws from the inside and does not leak water.
Resistant to Impacts and External Factors
It is very durable in all weather conditions thanks to its specially designed and fiber supported material. No breakage, cracking and deformation.
Protected Against Ultraviolet (UV) Rays
All products are supplemented with additives that protect against UV rays. Thus, they are resistant to yellowing and deterioration.
Electric Insulation Feature
Dielectric (non-conductive) material provides a great advantage especially in chassis and electrical leaks that may occur due to grounding problems. Therefore, it can be used safely on metal surfaces.
Technical Details
Please see the drawing above for product dimensions.
